RESEARCH ARTICLE


Experimental Studies on Cohesion of Carbon Fibre Reinforced Polymer for Reinforcement of Bridge Deck Slabs



Tian Shuai1, 2, *, Yu Tianlai1, Zhao Yunpeng1, 3, Guo Weimin3, Li Haisheng1
1 Civil Engineering College, Northeast Forestry University, Harbin, 150040, China
2 School of Civil Engineering, Liaoning University of Science and Technology, Anshan 114051, China
3 Traffic Planning and Design Institute of Liaoning Province, Shenyang, 110166, China


Article Metrics

CrossRef Citations:
3
Total Statistics:

Full-Text HTML Views: 3679
Abstract HTML Views: 2426
PDF Downloads: 771
ePub Downloads: 633
Total Views/Downloads: 7509
Unique Statistics:

Full-Text HTML Views: 1446
Abstract HTML Views: 1224
PDF Downloads: 512
ePub Downloads: 444
Total Views/Downloads: 3626



Creative Commons License
© Shuai et al; Licensee Bentham Open.

open-access license: This is an open access article licensed under the terms of the Creative Commons Attribution-Non-Commercial 4.0 International Public License (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/legalcode), which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.

* Address correspondence to this author at the School of Civil Engineering, Liaoning University of Science and Technology, Anshan 114051, China; Tel: +86-13942206793; Fax: +86-04125599006; E-mail: tian_shuai129@126.com


Abstract

Bridge deck slabs reinforced by carbon fibre reinforced polymer (CFRP) are subjected to a number of problems related to cohesion, such as slippage, disengaging, and debonding. In order to address such problems, we conducted indoor shear, stretching, and debonding tests, analysed the change rule of cohesion in these three different environments, and determined the optimum construction technique for improving the cohesion of CFRP. We found that to obtain acceptable shear strength, manufactured sand should be spread on the surface of the impregnating resin adhesive. Soaking, freeze thawing, and wheel grinding processes affected the tensile strength of the interface, which was related linearly to the shear strength of the interface. Following wheel grinding on an asphalt surface at high temperatures, the test value for the bearing-debonding capacity on a test slab was unchanged, and the effectiveness of the CFRP was still apparent. The influence of high-temperature wheel grinding can be ignored. This study can serve as a reference for the design of reinforced bridge deck slabs.

Keywords: Bridge deck pavement, Bridge deck slabs, Carbon fibre reinforced polymer, Cohesion, Debonding, Reinforcement.