RESEARCH ARTICLE


Critical Lateral-Torsional Buckling Moments of Steel Web-Tapered I-beams



Ioannis G. Raftoyiannis, Theodore Adamakos
Department of Civil Engineering, National Technical University of Athens, Athens 15780, Greece.


Article Metrics

CrossRef Citations:
9
Total Statistics:

Full-Text HTML Views: 684
Abstract HTML Views: 2213
PDF Downloads: 1184
Total Views/Downloads: 4081
Unique Statistics:

Full-Text HTML Views: 375
Abstract HTML Views: 1215
PDF Downloads: 783
Total Views/Downloads: 2373



Creative Commons License
© Raftoyiannis et al.;

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Correspondence: * Address correspondence to this author at the Department of Civil Engineering, National Technical University of Athens, Athens 15780, Greece.


Abstract

This paper deals with the stability of steel web-tapered I-beams subjected to bending loads. Tapered beams can carry a maximum bending moment at a single location while in the rest of the member the moment carrying capacity is considerably lower. This results in appreciable savings in materials as well as in construction. Numerous researchers have focused on the investigation of the elastic behavior of tapered I-beams and many theoretical findings have been incorporated into the current specifications. According to Eurocode 3, the elastic critical moment is used for determining the design strength against lateral-torsional buckling (LTB) of I-beams with uniform cross-section and a number of coefficients is employed accounting for the boundary conditions, the cross-sectional geometry and the type of transverse loading, while no detailed information is given regarding non-uniform members. In this work a simple numerical approach is presented for determining the critical lateral-torsional buckling loads of web-tapered I-beams. Modification factors of the elastic critical moment with reference to the mean cross-section are given for various taper ratios. The results presented in graphical form are compared with those of previous investigations. The approach presented herein can be very easily applied for the design of tapered beams against lateral-torsional buckling.

Keywords: