RESEARCH ARTICLE
Fastener Scaffold Stability Analysis and Experimental Research Under Non-Uniform Distributed Load
Dong Chen1, *, Yuzhuo Wang2, Xiping He1
Article Information
Identifiers and Pagination:
Year: 2017Volume: 11
Issue: Suppl-3, M8
First Page: 873
Last Page: 886
Publisher ID: TOCIEJ-11-873
DOI: 10.2174/1874149501711010873
Article History:
Received Date: 20/01/2017Revision Received Date: 5/04/2017
Acceptance Date: 1/05/2017
Electronic publication date: 17/11/2017
Collection year: 2017
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
Introduction:
An experiment was carried out on the basis of material nonlinearity, geometry nonlinearity and semi rigid fasteners for the internal force distribution and transfer rules of the scaffold.
Methods:
This paper presents results from a set of numerical studies on the influence of the random imperfection method, the interaction of various imperfections and the most disadvantageous stability limit load.
Result and Conclusion:
Data from numerical studies indicate that stress at the top of the vertical bar was larger within the scope of load; and the horizontal bar and brace participated in the work of the scaffold. The internal force that came through the two types of bars enabled us to realize the redistribution in every vertical bar in order to decrease the stress from the top to the bottom of the vertical bars and involve them in the work of the scaffold. Data from numerical studies also indicates that these imperfections all interact with each other and the load distribution also influences the scaffold’s stability.