The Open Dentistry Journal




ISSN: 1874-2106 ― Volume 14, 2020
CASE REPORT

Improving Oral Surgery: A Workflow Proposal to Create Custom 3D Templates for Surgical Procedures



Matteo Peditto1, Riccardo Nucera1, Erasmo Rubino1, Antonia Marcianò2, Marco Bitto1, Antonio Catania1, Giacomo Oteri1, *
1 Department of Biomedical and Dental Sciences, Morphological and Functional Images, University of Messina, Policlinico G. Martino, Messina, Italy
2 Department of Clinical and Experimental Medicine, University of Messina, Policlinico G. Martino, Messina, Italy

Abstract

Background:

Computer-guided technologies are adopted in various fields of surgery to limit invasiveness and obtain patient benefits in terms of surgery duration and post-operative course. Surgical templates realized through CAD/CAM technologies are widely diffused in implant dentistry. The aim of this work is to propose, beyond implantology, the feasibility of application of 3D printed surgical templates in oral surgery procedures requiring osteotomies (like maxillary cyst enucleation and tooth disimpaction) in order to obtain accurate surgeries, avoid anatomical damage of surrounding structures and decrease patient’s morbidity, using a simple, low-cost protocol of fabrication.

Objective:

To provide a reliable CAD-CAM workflow for the realization of surgical templates in oral surgery.

Methods:

Three clinical scenarios are described: A maxillary canine disimpaction, a mandibular cyst removal, and an orthodontic miniscrew placement. Each one was managed using custom surgical templates realized using the proposed workflow. A Stereolithography (STL) file of maxillary structures was obtained by the use of a 3D medical image processing software (Materialise Mimics 20.0) a segmentation toolbox acquiring RX volumes by Cone-Beam Computed Tomography (CBCT). Digital models of the teeth, acquired as STL files directly, are imported in the same 3D medical image processing freeware (Materialise Mimics 20.0) to merge STL files of maxillary structures and teeth. Data are transported into Blue Sky Plan 4.0 (Blue Sky Bio, LLC), a software for 3D implant guides fabrication, together with the DICOM images package of maxillary volumes to carry out the pre-surgical treatment planning. Anatomical structures at risk are identified; a contour of ideal incision shape and bone osteotomy extent is drawn. Finally, the resulting three-dimensional guide is digitally generated and the surgical guide printed. The resulting 3D template shows the following major features: teeth support, flap management and bone osteotomy design.

Results:

The proposed work-flow aided the surgeon in both pre-operative and intra-operative work phases through accurate virtual planning and the fabrication of precise surgical guides to be used in oral surgery practice. In each clinical scenario, the use of custom 3D templates allowed better control of the osteotomy planes and flap management. No adverse events occurred during both surgical and healing phases.

Conclusion:

The proposed digital workflow represents a reliable and straightforward way to produce a surgical guide for oral surgery procedures. These templates represent a versatile tool in maxillary cyst enucleations, tooth disimpaction, and other surgical procedures, increasing accuracy, minimizing surgical complications, and decreasing patient’s morbidity.

Keywords: CAD/CAM, Computer-assisted, Guided surgery, Oral surgery, Surgical template, 3D printing.


Article Information


Identifiers and Pagination:

Year: 2020
Volume: 14
First Page: 35
Last Page: 44
Publisher Id: TODENTJ-14-35
DOI: 10.2174/1874210602014010035

Article History:

Received Date: 19/09/2019
Revision Received Date: 02/12/2019
Acceptance Date: 18/12/2019
Electronic publication date: 14/02/2020
Collection year: 2020

© 2020 Peditto et al.

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: (https://creativecommons.org/licenses/by/4.0/legalcode). This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.


* Address correspondence to this author at the Department of Biomedical and Dental Sciences, Morphological and Functional Images, University of Messina, Policlinico G. Martino, Messina, via Consolare Valeria 1, Messina, Italy ;
Tel: +390902216910; E-mail: giacomo.oteri@unime.it




Track Your Manuscript:


Endorsements



"Thank you for your magnificent and marvelous support throughout the publication stages. I would like to endorse my experience with you as a Junior Researcher and a recent graduate of the Dental school. Once again Thank you for your Great Help and Guidance throughout the stages of Publication. You guys are a great team and I am proud to be a Young Bentham author."


Asra Sabir Hussain
The University of Edinburgh Business School, UK

"My experience with Bentham Open was a valuable one because the quality of the services and analysis of my paper contributed in improving what we intended to convey to the readers."


José Ricardo Kina
Department of Surgery and Integrated Clinic,
Araçatuba School of Dentistry, São Paulo State University
Brazil

"The Publication Manager was very cooperative and replied my mails and guided me without any delays; however the reviewing process was too long."


Mahtab Memarpour
Prevention of Oral and Dental Disease Research Center,
Department of Pediatric Dentistry, School of Dentistry,
Shiraz University of Medical Sciences, Shiraz,
Iran


Browse Contents



Webmaster Contact: info@benthamopen.net
Copyright © 2020 Bentham Open