Table 3: Parameters used to establish the Mohr-Coulomb data in DIANA.

Depth [m]		Sand 1	Clay 1	Clay 2	Clay 3	Sand 2	Clay 4	Sand 3
		0 - 2.4	2.4 - 2.7	2.7 - 3.7	3.7 - 4.6	4.6 - 6.3	6.3 - 8.0	8.0 - 15.0
Linear Elasticity Data	E [kPa]	25000 - 55000
	ν	0.3
	γ [kN/m3]	16.7	19.1	19.1	19.1	18.1	19.1	16.7
Plasticy Data	su	0	41	50	40	0	57	0
	φ	40	0	0	0	38	0	33
	Tensile Stress [kPa]	0	0	0	0	0	0	0
Initial Stress	K0	0.6	1.0	1.0	1.0	0.6	1.0	0.6
Water level 2.13m below the surface