Table 3: Lateral force, deformation and ductile coefficient of specimens at typical points.

Test Unit	Direction	Nominal yield point				Peak point				Ultimate point		μΔ
		Fy /kN		Δy /mm		Fp /kN		Δp /mm	θp	Δu /mm	θu
2-DW5-L2	push	721	741	12.52	10.02	1083	1148	62.70	1/60	69.47	1/48	6.63
	pull	761		7.51		1213		46.99		63.27
2-DW10-LN1	push	604	677	7.82	8.74	970	1037	41.30	1/71	67.31	1/47	7.86
	pull	751		9.65		1104		48.95		70.10
2-DW12-LN2	push	775	808	10.84	10.55	1090	1160	42.49	1/96	50.81	1/70	4.38
	pull	841		10.26		1230		27.28		41.62