The Open Dentistry Journal is an Open Access online journal, which publishes Research articles, Reviews , letters and guest edited single topic issues in the field of in the field of dentistry and oral cavity, aiming at providing the most complete and reliable source of information on current developments in the field.
Each peer-reviewed article that is published in a Bentham OPEN Journal is universally and freely accessible via the Internet in an easily readable and printable PDF format.
Authors should ONLY submit their articles directly through our online system as we do not accept articles through intermediary companies or agents.
Manuscripts must be submitted by one of the authors of the manuscript, and should not be submitted by anyone on their behalf. The principal/corresponding author will be required to submit a Copyright Letter along with the manuscript, on behalf of all the co-authors (if any). The author(s) will confirm that the manuscript (or any part of it) has not been published previously or is not under consideration for publication elsewhere. Furthermore, any illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained.
For all online submissions, please provide soft copies of all the materials (main text in MS Word or Tex/LaTeX), figures / illustrations in TIFF, PDF or JPEG, and chemical structures drawn in ChemDraw (CDX) / ISISDraw (TGF) as separate files, while a PDF version of the entire manuscript must also be included, embedded with all the figures / illustrations / tables / chemical structures etc. It is advisable that the document files related to a manuscript submission should always have the name of the corresponding author as part of the file name, i.e., "Cilli MS text.doc" , "Cilli MS Figure 1", etc.
It is imperative that before submission, authors should carefully proofread the files for special characters, mathematical symbols, Greek letters, equations, tables and images, to ensure that they appear in proper format.
References, figures, tables, structures etc. should be referred to in the text at the place where they have been discussed. Figure legends/caption should also be provided.
A successful electronic submission of a manuscript will be followed by a system-generated acknowledgement to the principal/corresponding author within 72 hours of the dispatch of the manuscript. Any questions with regards to the preparation of and submission of your manuscript to the journal should be addressed to email@example.com and copied to firstname.lastname@example.org
The editorial policies of Bentham OPEN on publication ethics, peer-review, plagiarism, copyrights/ licenses, errata/corrections and article retraction/ withdrawal can be viewed at Policy Page. Articles are licensed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0) (https://creativecommons.org/licenses/by/4.0/legalcode), which permits unrestricted, distribution and reproduction in any medium, provided that the work is properly cited.
It is a mandatory requirement that a signed copyright letter also be submitted along with the manuscript by the author to whom correspondence is to be addressed, delineating the scope of the submitted article declaring the potential competing interests, acknowledging contributions from authors and funding agencies, and certifying that the paper is prepared according to the 'Instructions for Authors'. All inconsistencies in the text and in the reference section, and any typographical errors must be carefully checked and corrected before the submission of the manuscript. The article contains no such material or information that may be unlawful, defamatory, fabricated, plagiarized, or which would, if published, in any way whatsoever, violate the terms and conditions as laid down in the agreement. The authors acknowledge that the publishers have the legal right to take appropriate action against the authors for any such violation of the terms and conditions as laid down in the agreement. Download the Copyright Letter
The journal accepts original research articles, review articles and letters written in English. Single topic/thematic issues may also be considered for publication.
Supplement/Single Topic Issues:
The journal also considers Supplements/Single topic issues for publication. A Supplement/Single topic issue will be a collection of review/research articles (minimum of 6, maximum of 20 articles) based on a contemporary theme or topic of great importance to the field. Mini-supplements consisting of between 3 to 5 articles are also welcome. The Guest Editors' main editorial task is to invite the contributors to the Supplement and to manage the peer review of submitted manuscripts. A short summary or proposal for editing a supplement should be submitted to the Editor-in-Chief at e-mail to email@example.com.
The manuscript should be written in English in a clear, direct and active style. All pages must be numbered sequentially, facilitating in the reviewing and editing of the manuscript.
Our contracted service provider Eureka Science can, if needed, provide professional assistance to authors for the improvement of English language and figures in manuscripts.
Research articles should be of 4000-6000 words with 75 or more references excluding figures, structures, photographs, schemes, tables, etc.
The length of a published comprehensive review article is from 35000 to 40000 words with 100 or more references excluding figures, structures, photographs, schemes, tables etc.
Systematic Reviews include systematic updates in review protocols, methods, research, and results from all relevant fields for any studies and updates on already published issues. The total number of words for a published systematic review is from 35000 to 40000 words with 100 or more references excluding figures, structures, photographs, schemes, tables etc.
Mini-reviews should be 6000- 10000 words with 75 or more references excluding figures, structures, photographs, schemes, tables etc.
Letters should be 3000-6000 words with 40 or more references excluding figures, structures, photographs, schemes, tables, etc.
Randomized Drug Clinical Trial Studies:
Trial studies should be 1500 to 4000 words with 50 or more references excluding figures, structures, photographs, schemes, tables etc.
This journal publishes open access reviews on recently published books (both print and electronic) relevant to the journal. Publishers and authors of books are invited to contact our book reviews editor at firstname.lastname@example.org with book review requests. All submitted books will be reviewed by an independent expert in the field. No page charges will be levied to authors for the publication of book reviews.
Case reports should describe new observations of findings or novel/unique outcomes relevant to the field. The total number of words for a published case report is 1500 to 2000 words with 40 or more references excluding figures, structures, photographs, schemes, tables etc.
There is no restriction on the number of figures, tables or additional files e.g. video clips, animation and datasets, that can be included with each article online. Authors should include all relevant supporting data with each article.
MANUSCRIPT SECTIONS FOR PAPERS:
Manuscripts submitted for research and review articles in the respective journal should be divided into the following sections:
List of abbreviations (if any)
Consent for Publication
Conflict of interest
Figures/illustrations (if any)
Chemical structures (if any)
Tables and captions (if any)
Supportive/supplementary material (if any)
The title should be precise and brief and must not be more than 120 characters. Authors should avoid the use of non standard abbreviations. The title must be written in title case except for articles, conjunctions and prepositions.
Authors should also provide a short ‘running title’. Title, running title, by line correspondent footnote and key words should be written as presented in the original manuscript.
Title page should include paper title, author(s) full name and affiliation, corresponding author(s) names complete affiliation/address, along with phone, fax and email.
The abstract of an article should be its clear, concise and accurate summary, having no more than 250 words, and including the explicit sub-headings (as in-line or run-in headings in bold). Use of abbreviations should be avoided and the references should not be cited in the abstract. Ideally, each abstract should include the following sub-headings, but these may vary according to requirements of the article.
6 to 8 keywords must be provided.
The main text should begin on a separate page and should be divided into title page, abstract and the main text. The text may be subdivided further according to the areas to be discussed, which should be followed by the List of Abbreviations (if any), Conflict of Interest, Acknowledgements and Reference sections. For review, the manuscript should be divided into title page, abstract and the main text. The text may be subdivided further according to the areas to be discussed, which should be followed by the Acknowledgements and Reference sections. For Research Articles the manuscript should begin with the title page and abstract followed by the main text, which must be structured into separate sections as Introduction, Material and Methods, Results, Discussion, Conclusion, Conflict of Interest, Acknowledgements and References. The Review Article should mention any previous important recent and old reviews in the field and contain a comprehensive discussion starting with the general background of the field. It should then go on to discuss the salient features of recent developments. The authors should avoid presenting material which has already been published in a previous review. The authors are advised to present and discuss their observations in brief. The manuscript style must be uniform throughout the text and 10 pt Times New Roman fonts should be used. The full term for an abbreviation should precede its first appearance in the text unless it is a standard unit of measurement. The reference numbers should be given in square brackets in the text. Italics should be used for Binomial names of organisms (Genus and Species), for emphasis and for unfamiliar words or phrases. Non-assimilated words from Latin or other languages should also be italicized e.g. per se, et al., etc.
Section headings should be numbered sequentially, left aligned and have the first letter capitalized, starting with the introduction. Sub-section headings however, should be in lower-case and italicized with their initials capitalized. They should be numbered as 1.1, 1.2, etc.
The Introduction section should include the background and aims of the research in a comprehensive manner.
MATERIALS AND METHODS:
This section provides details of the methodology used along with information on any previous efforts with corresponding references. Any details for further modifications and research should be included.
Repeated information should not be reported in the text of an article. A calculation section must include experimental data, facts and practical development from a theoretical perspective.
Results should be precise.
This should explore the significance of the results of the work, and present reproducible procedure. Extensive citations and discussion of published literature should be avoided.
The Results and discussions may be presented individually or combined in a single section with short and informative headings.
A small paragraph summarizing the contents of the article, presenting the final outcome of the research or proposing further study on the subject, may be given at the end of the article under the Conclusion section.
Standard Protocol on Approvals, Registrations, Patient Consents & Animal Protection:
All clinical investigations must be conducted according to the Declaration of Helsinki principles. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (http://www.icmje.org) with regard to the patient’s consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request that authors provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study.
In addition to the standard patient consent for participation in research, authors are responsible for obtaining patient consent-to-disclose forms for all recognizable patients in photographs, videos, or other information that may be published in the Journal, in derivative works, or on the journal’s web site and providing the manuscript to the recognizable patient for review before submission. The consent-to-disclose form should indicate specific use (publication in the medical literature in print and online, with the understanding that patients and the public will have access) of the patient's information and any images in figures or videos, and must contain the patient's signature or that of a legal guardian along with a statement that the patient or legal guardian has been offered the opportunity to review the identifying materials and the accompanying manuscript.
Authors must clearly state the name of the approval committee, highlighting that legal and ethical approval was obtained prior to initiation of the research work carried out on animals, and that the experiments were performed in accordance with the relevant guidelines and regulations stated below.
Bentham Open Publishers supports retrospective registration of systematic reviews, in a suitable registry (such as PROSPERO). The registered systematic review must include the registration number as the last line of the manuscript abstract.
Consent for Publication:
If the manuscript has an individuals’ data, such as personal detail, audio-video material etc., consent should be obtained from that individual. In case of children, consent should be obtained from the parent or the legal guardian.
A specific declaration of such approval and consent-to-disclose form must be made in the copyright letter and in a stand-alone paragraph at the end of the article especially in the case of human studies where inclusion of a statement regarding obtaining the written informed consent from each subject or subject's guardian is a must. The original should be retained by the guarantor or corresponding author. Editors may request to provide the original forms by fax or email.
Randomized Drug Clinical Trial Studies:
Randomized drug clinical trial studies are biomedical or health-related interventional and/or observational research studies conducted in phases in human beings who are randomly allocated to receive or not receive a preventive, therapeutic, or diagnostic intervention that follows a pre-defined protocol. The study is intended to determine the safety and efficacy of approaches to disease prevention, diagnosis and treatment.
Authors of randomized controlled trials are encouraged to submit trial protocols along with their manuscripts. All clinical trials must be registered (before recruitment of the first participant) at an appropriate online public trial registry that must be independent of for-profit interest (e.g.,www.clinicaltrials.gov). If you wish the editor(s) to consider an unregistered trial, please explain briefly why the trial has not been registered.
All randomized clinical trials should include a flow diagram and authors should provide a completed randomized trial checklist (see CONSORT Flow Diagram and Checklist; www.consort-statement.org) and a trial protocol.
Important points to remember while submitting clinical trials:
Each manuscript should clearly state an objective or hypothesis; the design and methods (including the study setting and dates, patients or participants with inclusion and exclusion criteria, or data sources, and how these were selected for the study); the essential features of any interventions; the main outcome measures; the main results of the study; a comment section placing the results in context with the published literature and addressing study limitations; and the conclusions. Data included in research reports must be original.
Trial registry name, registration identification number, and the URL for the registry should be included at the end of the abstract and also in the space provided on the online manuscript submission form. If your research article reports the results of a controlled health care intervention, list the trial registry, along with the unique identifying number (Please note that there should be no space between the letters and numbers of your trial registration number). Studies designed for other purposes, such as to study pharmacokinetics or major toxicity (e.g., phase 1 trials), are exempted.
All reports of randomized trials should include a section entitled “Randomization and Masking”, within the Methods section.
The manuscript must include a statement identifying the institutional and/or licensing committee that has approved the experiments, including any relevant details.
The SI system of units and the recommended international non-proprietary name (rINN) for drug names must be used. Kindly ensure that the dose, route, and frequency of administration of any drug you mention are correct.
Please ensure that the clinical trials sponsored by pharmaceutical companies follow the guidelines on good publication practice: (www.gpp-guidelines.org)
The editors reserve the right to reject manuscripts that do not comply with the above-mentioned requirements. The author will be held responsible for false statements or failure to fulfill the above-mentioned requirements.
Greek Symbols and Special Characters:
Greek symbols and special characters often undergo formatting changes and get corrupted or lost during preparation of manuscript for publication. To ensure that all special characters used are embedded in the text, these special characters should be inserted as a symbol but should not be a result of any format styling (Symbol font face) otherwise they will be lost during conversion to PDF/XML.
Authors are encouraged to consult reporting guidelines. These guidelines provide a set of recommendations comprising a list of items relevant to their specific research design. All kinds of measurements should be reported only in International System of Units (SI). Chemical equations, chemical names, mathematical usage, unit of measurements, chemical and physical quantity & units must conform to SI and Chemical Abstracts or IUPAC.
List of Abbreviations (if any):
If abbreviations are used in the text either they should be defined in the text where first used, or a list of abbreviations can be provided.
Conflict of Interest:
Financial contributions and any potential conflict of interest must be clearly acknowledged under the heading ‘Conflict of Interest’. Authors must list the source(s) of funding for the study. This should be done for each author.
All individuals listed as authors must have contributed substantially to the design, performance, analysis, or reporting of the work and are required to indicate their specific contribution. Anyone (individual/company/institution) who has substantially contributed to the study for important intellectual content, or was involved in the in drafting or revising the manuscript must also be acknowledged.
Guest or honorary authorship based solely on position (e.g. research supervisor, departmental head) is discouraged
The specific requirements for authorship have been defined by the International Committee of Medical Journal Editors (www.icmje.org). Examples of authors' contributions are: 'designed research/study', 'performed research/study', 'contributed important reagents', 'collected data', 'analyzed data', 'wrote paper' etc. This information must be included in the submitted manuscript as a separate paragraph under the heading ‘Acknowledgements’. The corresponding author is responsible for obtaining permission from all co-authors for the submission of any version of the manuscript and for any changes in the authorship.
References must be listed in the numerical system (Vancouver). All references should be numbered sequentially [in square brackets] in the text and listed in the same numerical order in the reference section. The reference numbers must be finalized and the bibliography must be fully formatted before submission.
See below few examples of references listed in the correct Vancouver style:
Typical Paper Reference:
Botticelli D, Berglundh T, Lindhe J. Hard-tissue alterations following immediate implant placement in extraction sites. J Clin Periodont 2004; 10: 820-8.
Clarkson JJ. International collaborative research on fluoride. J Dent Res 2000; 79: 893-904.
Typical Chapter Reference:
Hilton TJ. In: Schwarts RS, Summitt JB, Robbins JW, Ed. Fundamentals of Operative Dentistry. Chicago, Quintessence Publishing 1996; 207-28.
Lindhe J, Lang NP, Karring K. Periodontology and Implant Dentistry. 4th ed. Oxford: Blackwell Munksgaard 2003.
Nakabayashi N, Pashley DH, Eds. Hybridization of Dental Hard Tissues, Tokyo: Quintessence Publishing 1998.
Anderson JC. Current status of chorion villus biopsy. In: Tudenhope D, Chenoweth J, Eds. Proceedings of the 4th congress of the Australian perinatal society; 1986: Brisbane, Queensland: Australian Perinatal Society 1987; pp. 190-6.
Harris AH, Ed. Economics and health: 1997: Proceedings of the 19th australian conference of health economists; 1997 Sep 13-14; Sydney, Australia. Kensington, N.S.W.: School of Health Services Management, University of New South Wales 1998.
Published Book (Monograph):
Crane D. Invisible colleges: Diffusion of knowledge in scientific communities. Chicago: University of Chicago Press 1972.
Journal Article on the Internet:
Shepherd JP, Thomas DW, Shepherd P. Privatising the NHS: dentistry paves the way. BMJ [serial on the Internet]. 1996 April 10; [cited 1996 April 13]; 312: [about 10 screens]. Available from: http://www.bmj.com/cgi/content/full/312/7036/922
Seghatol M, inventor; Jean-Pierre Durand, assignee. Microwave polymerization system for dentistry. United States Patent US 6441354 2002 Aug.
Dissertation or Thesis:
Robert LK. Aspects of the use of design of magnetism in dentistry. Ph.D. diss., Dept. of Dentistry, Hong Kong Univ 1999b.
Citations for articles/material published exclusively online or in open access (free-to-view), must contain the exact Web addresses (URLs) at the end of the reference(s), except those posted on an author’s Web site unless editorially essential, e.g. ‘Reference: Available from: URL’.
Some important points to remember:
All references must be complete and accurate.
If the number of authors exceeds six then et al will be used after three names (the term “et al.” should be in italics).
Online citations should include the date of access.
Journal abbreviations should follow the Index Medicus/MEDLINE.
Take special care of the punctuation convention as described in the above-mentioned examples.
Avoid using superscript in the in-text citations and reference section.
Abstracts, unpublished data and personal communications (which can only be included if prior permission has been obtained) should not be given in the reference section but they may be mentioned in the text and details provided as footnotes.
The authors are encouraged to use a recent version of EndNote (version 5 and above) or Reference Manager (version 10) when formatting their reference list, as this allows references to be automatically extracted.
In case there is a need to present lengthy, but essential methodological details, use Appendices, which can be a part of the article. An appendix must not exceed three pages (Times New Roman, 10 point fonts, 900 max. words per page).The information should be provided in a condensed form, ruling out the need of full sentences. A single appendix should be titled APPENDIX, while more than one can be titled APPENDIX A, APPENDIX B, and so on.
Figures/Illustrations (if any):
All authors must strictly follow the guidelines below for preparing illustrations for publication in "The Open Dentistry Journal". If the figures are found to be sub-standard, then the manuscripts will be rejected and the authors offered the option of figure improvement professionally by Eureka Science. The costs for such improvement will be charged to the authors.
Illustrations should be embedded in the text file, and must be numbered consecutively in the order of their appearance. Each figure should include only a single illustration which should be cropped to minimize the amount of space occupied by the illustration.
If a figure is in separate parts, all parts of the figure must be provided in a single composite illustration file.
Photographs should be provided with a scale bar if appropriate, as well as high-resolution component files.
For Line Art image type, which is generally an image based on lines and text and does not contain tonal or shaded areas, the preferred file format is TIFF or EPS, with colour mode being Monochrome 1-bit or RGB, in a resolution of 900-1200 dpi.
For Halftone image type, which is generally a continuous tone photograph and contains no text, the preferred file format is TIFF, with colour mode being RGB or Grayscale, with a minimum resolution of 300 dpi.
For Combination image type, which is generally an image containing halftone in addition to text or line art elements, the preferred file format is TIFF, with colour mode being RGB or Grayscale, in a resolution of 500-900 dpi.
For illustrations, the following file formats are acceptable:
EPS (preferred format for diagrams)
PDF (also especially suitable for diagrams)
PNG (preferred format for photos or images)
Microsoft Word (version 5 and above; figures must be a single page)
PowerPoint (figures must be a single page)
JPEG (conversion should be done using the original file)
Bentham OPEN does not process figures submitted in GIF format.
If the large size of TIFF or EPS figures acts as an obstacle to online submission, authors may find that conversion to JPEG format before submission results in significantly reduced file size and upload time, while retaining acceptable quality. JPEG is a ‘lossy’ format, however in order to maintain acceptable image quality, it is recommended that JPEG files are saved at High or Maximum quality.
Files should not be compressed with tools such as Zipit or Stuffit prior to submission as these tools will in any case produce negligible file-size savings for JPEGs and TIFFs, which are already compressed.
Please do not:
Supply embedded graphics in your word processor (spreadsheet, presentation) document.
Supply files that are optimized for screen use (like GIF, BMP, PICT, WPG); the resolution is too low.
Supply files that are too low in resolution.
Submit graphics that are disproportionately large for the content.
Image Conversion Tools:
There are many software packages, many of them freeware or shareware, capable of converting to and from different graphics formats, including PNG.
Good general tools for image conversion include GraphicConverter on the Macintosh, PaintShop Pro, for Windows, and ImageMagick, which is available on Macintosh, Windows and UNIX platforms.
Note that bitmap images (e.g. screenshots) should not be converted to EPS, since this will result in a much larger file size than the equivalent JPEG, TIFF, PNG or BMP, with no increase in quality. EPS should only be used for images produced by vector-drawing applications such as Adobe Illustrator or CorelDraw. Most vector-drawing applications can be saved in, or exported as, EPS format. In case the images have been originally prepared in an Office application, such as Word or PowerPoint, then the original Office files should be directly uploaded to the site, instead of being converted to JPEG or another format that may be of low quality.
Chemical Structures (if any):
Chemical structures MUST be prepared according to the guidelines below.
Structures should be prepared in ChemDraw and provided as separate file, submitted both on disk and in printed formats.
Structure Drawing Preferences:
[As according to the ACS style sheet]
18% of width
14.4 pt (0.500cm, 0.2in)
2.0 pt (0.071cm, 0.0278in)
0.6 pt (0.021cm, 0.0084in)
1.6 pt (0.096cm)
2.5 pt (0.088cm, 0.0347in)
Times New Roman
Under the Preference Choose:
Under Page Setup Use:
Tables (if any):
Data tables should be submitted in Microsoft Word table format.
Each table should include a title/caption being explanatory in itself with respect to the details discussed in the table. Detailed legends may then follow.
Table number in bold font i.e. Table 1, should follow a title. The title should be in small case with the first letter in caps. A full stop should be placed at the end of the title.
Tables should be embedded in the text exactly according to their appropriate placement in the submitted manuscript.
Columns and rows of data should be made visibly distinct by ensuring that the borders of each cell are displayed as black lines.
Tables should be numbered in Arabic numerals sequentially in order of their citation in the body of the text.
If a reference is cited in both the table and text, please insert a lettered footnote in the table to refer to the numbered reference in the text.
Tabular data provided as additional files can be submitted as an Excel spreadsheet.
Supportive/Supplementary Material (if any):
We do encourage to append supportive material, for example a PowerPoint file containing a talk about the study, a PowerPoint file containing additional screenshots, a Word, RTF, or PDF document showing the original instrument(s) used, a video, or the original data (SAS/SPSS files, Excel files, Access Db files etc.) provided it is inevitable or endorsed by the journal's Editor.
Published/reproduced material should not be included unless you have obtained written permission from the copyright holder, which must be forwarded to the Editorial Office in case of acceptance of your article for publication.
Supportive/Supplementary material intended for publication must be numbered and referred to in the manuscript but should not be a part of the submitted paper. In-text citations as well as a section with the heading "Supportive/Supplementary Material" before the "References" section should be provided. Here, list all Supportive/Supplementary Material and include a brief caption line for each file describing its contents.
Any additional files will be linked into the final published article in the form supplied by the author, but will not be displayed within the paper. They will be made available in exactly the same form as originally provided only on our Web site. Please also make sure that each additional file is a single table, figure or movie (please do not upload linked worksheets or PDF files larger than one sheet). Supportive/ Supplementary material must be provided in a single zipped file not larger than 4 MB.
Authors must clearly indicate if these files are not for publication but meant for the reviewers'/editors' perusal only.
PERMISSION FOR REPRODUCTION:
Published/reproduced material should not be included unless you have obtained written permission from the copyright holder, which should be forwarded to the Editorial Office in case of acceptance of your article for publication.
For obtaining permission for reproducing any material published in an article by Bentham OPEN, please fill in the request FORM and send to email@example.com for consideration.
AUTHORS AND INSTITUTIONAL AFFILIATIONS:
The names of the authors should be provided according to the previous citations or as the authors would want them to be published along with the institutional affiliations, current address, telephone, cell & fax numbers and the email address. Email address must be provided with an asterisk in front of the name of the principal author. The corresponding author(s) should be designated and their complete address, business telephone and fax numbers and e-mail address must be stated to receive correspondence and galley proofs.
REVIEWING AND PROMPTNESS OF PUBLICATION:
All papers submitted for publication are immediately subjected to preliminary editorial scrutiny by the Editor-in-Chief regarding their suitability. The Editor-in-Chief determines if the manuscript:
(a) falls within the scope of the journal and
(b) meets the editorial criteria of Bentham Open Publishers in terms of originality and quality.
Manuscripts that appear to be suitable are then subjected to single-blind peer-review by, usually three, neutral eminent experts. The services of eminent international experts are sought through invitations to conduct the peer-review of a submitted manuscript, keeping in view the scope of the manuscript and the expertise of the reviewers. The identity of the reviewers is not disclosed to the authors. The anonymity of reviewers ensures objective and unbiased assessment of the manuscript by the reviewers.
Before sending the manuscripts to reviewers, Bentham Open seeks consent from potential reviewers about their availability and willingness to review. Correspondence between the editorial office of the journal and the reviewers is kept confidential. The reviewers are expected to provide their reports in a timely fashion since a prompt review leads to timely publication of a manuscript which is beneficial not only to the authors but to the scientific community as well.
The editorial process and peer-review workflow for each journal are taken care of by a team of Senior Editors, Editorial Advisory Board Members (EABMs) and dedicated Journal managers who have the requisite expertise in their specific fields.
The Editor-in-Chief may recommend the acceptance or rejection of a manuscript after considering the opinions of the independent referees, or he/she may take assistance and advice from other experts in the field, if needed.
The Editor-in-Chief and Senior Editors of a journal have the right to select reviewers for a particular manuscript considering the knowledge and experience of the reviewers.
After reviewing of the manuscript by at least two independent experts, in addition to the assessment of the Editor, the decision is relayed to the authors, which may be categorized as:
Accept without changes
Bentham Open requests not to have the manuscripts peer-reviewed by those experts who may have competing interest with the author(s) of a submitted manuscript. It is not possible for Editors to be aware of all competing interests; it is therefore expected that the reviewers would inform the Editor-in-Chief/Handling Editor if they notice any potential competing interest during the course of review of a manuscript. Moreover, the reviewers are expected to inform the Editors or editorial office of the journal if they have a conflict of interest in carrying out the review of a manuscript submitted by any author/contributor of the manuscript.
Papers which are delayed by the authors in revision for more than 30 days are required to be re-submitted as a new submission. Papers accepted for publication are typeset and proofs are dispatched to authors for any corrections prior to final publication.
LANGUAGE AND EDITING:
Manuscripts submitted containing language inconsistencies will not be published. Authors must seek professional assistance for correction of grammatical, scientific and typographical errors. Professional team available at Eureka Science may assist you in the English language editing of your article. Please contact Eureka Science for a language editing quote at e-mail: firstname.lastname@example.org stating the total number of words of the article to be edited.
언어 및 편집:
영문 오타가 많은 원고는 출판되지 않을 것입니다. 영문 오타를 없애겠다는 조건으로 받은 원고는 영어 편집 전문회사인 유럽 공동 기술개발 기구로부터 가격 견적서가 보내 질 것입니다. 영어 작문에 어려움이 있는 비영어권 국가의 저자들은 원고를 학술지에 제출하기 전에 영어 편집회사와 접촉할 것을 권합니다. 영어 편집 견적서를 받기 위해서 교정될 원고의 단어수를 적은 메일을 유럽 공동 기술개발 기구 메일인 email@example.com 로 보내시기 바랍니다.
Les manuscrits soumis avec plusieurs erreurs typographiques en Anglais ne seront pas publiés en l’état. Les manuscrits sont acceptés pour publication à la condition que l'anglais utilisé soit corrigé après la soumission et seront envoyés pour examen à Eureka Science, une société d'édition de langue professionnelle. Les auteurs en provenance de pays où la langue est différente de l'anglais et qui ont de médiocres compétences en anglais écrit, sont priés de contacter la société d'édition de langue avant de soumettre leur manuscrit à la revue. Merci de contacter Eureka Science à firstname.lastname@example.org pour un devis en indiquant le nombre total de mot de l’article à éditer.
Authors are required to proofread the PDF versions of their manuscripts before submission. To avoid delays in publication, proofs should be checked immediately for typographical errors and returned within 48 hours. Major changes are not acceptable at the proof stage. If unable to send corrections within 48 hours due to some reason, the author(s) must at least send an acknowledgement on receiving the galley proofs or the article will be published exactly as received and the publishers will not be responsible for any error occurring in the manuscript in this regard.
The corresponding author will be solely responsible for ensuring that the revised version of the manuscript incorporating all the submitted corrections receives the approval of all the authors of the manuscript.
Authors who publish in Bentham OPEN Journals retain copyright to their work. It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. Once submitted to the journal, the author may not withdraw their manuscript at any stage prior to publication.
Articles are licensed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0) (https://creativecommons.org/licenses/by/4.0/legalcode), which permits the copying and redistribution of the material in any medium or format, as well as remixing, transformation, and building upon the material for any purpose, even commercially, provided appropriate credit is given, a link to the licence is provided, and provided it is indicated if any changes were made.
CHANGES TO AUTHORSHIP:
Authors must provide a final list of authors at the time of submission, ensuring the correct sequence of the names of authors, which will not be considered for any addition, deletion or rearrangement after final submission of the manuscript. If a change is essentially required, it can only be done on Editor’s approval, for which the Editor must receive the following from the corresponding author:
(a) the reason for change in the author list and the sequence
(b) written confirmation from all co-authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, confirmation from the author being added or removed is mandatory.
Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of authors after the manuscript has been accepted. While the Editor considers the request, publication of the manuscript will be suspended. If the manuscript has already been published in an online issue, any requests approved by the Editor will result in a corrigendum.
APPEALS AND COMPLAINTS:
Generally, the editorial decisions are not reverted. However, authors who think that their manuscript was rejected due to a misunderstanding or mistake may seek an explanation for the decision. Appeals must give sound reasoning and compelling evidence against the criticism raised in the rejection letter. A difference of opinion as to the interest, novelty, or suitability of the manuscript for the journal will not be considered as an appeal. The EIC and other relevant editors will consider the appeal and the decision thereafter taken by the journal will be deemed final. Acceptance of the manuscript is not guaranteed even if the journal agrees to reconsider the manuscript, and the reconsideration process may involve previous or new reviewers or editors and substantive revision.
Authors who wish to make a complaint should refer them to the Editor-in-Chief of the journal concerned. Complaints to the Publisher may be emailed to email@example.com
Bentham OPEN uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. iThenticate software checks content against a database of periodicals, the Internet, and a comprehensive article database. It generates a similarity report, highlighting the percentage overlap between the uploaded article and the published material. Any instance of content overlap is further scrutinized for suspected plagiarism according to the publisher’s Editorial Policies. Bentham OPEN allows an overall similarity of 20% for a manuscript to be considered for publication. The similarity percentage is further checked keeping the following important points in view:
Low Text Similarity:
The text of every submitted manuscript is checked using the Content Tracking mode in iThenticate. The Content Tracking mode ensures that manuscripts with an overall low percentage similarity (but which may have a higher similarity from a single source) are not overlooked. The acceptable limit for similarity of text from a single source is 5%. If the similarity level is above 5%, the manuscript is returned to the author for paraphrasing the text and citing the original source of the copied material.
It is important to mention that the text taken from different sources with an overall low similarity percentage will be considered as a plagiarized content if the majority of the article is a combination of copied material.
High Text Similarity:
There may be some manuscripts with an overall low similarity percentage, but a higher percentage from a single source. A manuscript may have less than 20% overall similarity but there may be 15 % similar text taken from a single article. The similarity index in such cases is higher than the approved limit for a single source. Authors are advised to thoroughly rephrase the similar text and properly cite the original source to avoid plagiarism and copyright violation.
TYPES OF PLAGIARISM:
We all know that scholarly manuscripts are written after thorough review of previously published articles. It is therefore not easy to draw a clear boundary between legitimate representation and plagiarism. However, the following important features can assist in identifying different kinds of plagiarized content.
Reproduction of others words, sentences, ideas or findings as one’s own without proper acknowledgement.
Text recycling, also known as self-plagiarism. It is an author’s use of a previous publication in another paper without proper citation and acknowledgement of the original source.
Paraphrasing poorly: Copying complete paragraphs and modifying a few words without changing the structure of original sentences or changing the sentence structure but not the words.
Verbatim copying of text without putting quotation marks and not acknowledging the work of the original author.
Properly citing a work but poorly paraphrasing the original text is considered as unintentional plagiarism. Similarly, manuscripts with language somewhere between paraphrasing and quoting are not acceptable. Authors should either paraphrase properly or quote and in both cases, cite the original source.
Higher similarity in the abstract, introduction, materials and methods, and discussion and conclusion sections indicates that the manuscript may contain plagiarized text. Authors can easily explain these parts of the manuscript in many ways. However, technical terms and sometimes standard procedures cannot be rephrased; therefore Editors must review these sections carefully before making a decision.
PLAGIARISM IN PUBLISHED MANUSCRIPTS:
Published manuscripts which are found to contain plagiarized text are retracted from the journal website after careful investigation and approval by the Editor-in-Chief of the journal. A ‘Retraction Note’ as well as a link to the original article is published on the electronic version of the plagiarized manuscript and an addendum with retraction notification in the journal concerned.
The publication fee details for each article published in the journal are given below:
The publication fee for each published Letter article / short communication submitted is US $785.
The publication fee for each published Research article is US $945.
The publication fee for each published Mini-Review article is US $785.
The publication fee for each published Review article is US $1,250.
The publication fee includes the professional copy editing charges. Once the paper is accepted for publication, the author will receive an electronic invoice via email. Subsequent submissions from the Bentham OPEN Authors will receive a discount of US$ 100 on the total publication charges providing their previous submission did not avail any discount off the listed full author open access fee rate. Please click here to download the FeeForm.
Quick Track Publication:
An optional fast publication fee-based service called “QUICK TRACK” is available to authors for their submitted manuscripts.
QUICK TRACK allows online publication within 1 week of receipt of the final approved galley proofs from the authors. The total publication time, from date of first receipt of manuscript to its online publication is only 6 weeks, subject to its acceptance by the referees and modification (if any) by the authors within one week.
Authors who have availed QUICK TRACK services in a Bentham Open journal will be entitled for an exclusive 30% discount if they again wish to avail the same services in any Bentham Open journal within the next 12 months.
Bentham OPEN allows Special FEE Waiver to authors from 79 countries which are classified by the World Bank as low-income economies or lower-middle-income economies. Refer to the complete list of these countries click here.
Join as a member of Bentham OPEN today to obtain great discounts on your article publication fees! For details click here.
High quality printed reprints of published articles are available for purchase, if ordered, with a minimum number of 25 reprints.