The Open Mechanical Engineering Journal




    (Discontinued)

    ISSN: 1874-155X ― Volume 14, 2020
    RESEARCH ARTICLE

    Relation Between Convective Instability and Global Instability on a Rotating Disk



    Lee Keunseob*, Nishio Yu, Izawa Seiichiro, Fukunishi Yu
    Department of Mechanical Systems Engineering, Tohoku University, Sendai, Miyagi, Japan

    Abstract

    Background:

    The velocity fluctuations grow dominantly by convective instability form 32 spiral vortices which are stationary with respect to the disk. However, recent researches suggest that the global instability plays a role in the boundary layer transition.

    Objective:

    The study looks into the relation between convective instability and global instability.

    Method:

    A finite difference method is used to carry out numerical simulation. The full Navier-Stokes perturbation equations and the continuity equation solved by simulation code.

    Results:

    A disturbance is continuatively introduced to excite the convectively unstable mode, which successfully generates a flow field with 32 spiral and stationary vortices. Next, a short-duration artificial disturbance with an azimuthal wavenumber of 64 is introduced at Reynolds number of 530 in order to introduce a velocity fluctuation of the traveling mode, which is globally unstable. It is shown that the source of vibration for the globally unstable mode exists between Reynolds number of 560 and 670. Finally, the global and traveling wavenumber 64 component is excited in a flow field which is dominated by the convective and stationary wavenumber 32 component. It is shown that the wavenumber 64 component grows by the global instability even when the excitation is very weak.

    Conclusion:

    The results suggest that the reason why the globally unstable mode has not been observed in experiments is because the boundary layer transition caused by the convective instability takes place before the globally unstable mode can start to grow by itself.

    Keywords: Convective/Global instability, Rotating-disk flow, Three-dimensional boundary layer, Numerical simulation, Boundary layer transition, Nonlinear interaction.


    Article Information


    Identifiers and Pagination:

    Year: 2018
    Volume: 12
    Issue: Suppl-1, M3
    First Page: 37
    Last Page: 53
    Publisher Id: TOMEJ-12-37
    DOI: 10.2174/1874155X01812010037

    Article History:

    Received Date: 30/05/2017
    Revision Received Date: 16/06/2017
    Acceptance Date: 22/06/2017
    Electronic publication date: 15/02/2018
    Collection year: 2018

    © 2018 Keunseob et al.

    open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: (https://creativecommons.org/licenses/by/4.0/legalcode). This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.


    * Address correspondence to this author at the Department of Mechanical Systems Engineering, Tohoku University, Sendai, Miyagi, Japan, Tel: +81 22 7956929; Fax: +81 22 7956927; E-mail: keunseob@fluid.mech.tohoku.ac.jp




    Browse Contents



    Webmaster Contact: info@benthamopen.net
    Copyright © 2024 Bentham Open