RESEARCH ARTICLE


Seepage Control in a High Concrete Face-Rock Fill Dam Based on the Node Virtual Flow Method



Shou-Kai Chen1, Xiaoyue Zhang2, *
1 School of Water Conservancy, North China University of Water Resources and Electric Power, Zhengzhou, Beihuan Road 36#, 450011, P.R. China
2 Department of Hydraulic Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou, Xuelin Road 583#, Hangzhou, 310018, P.R. China


Article Metrics

CrossRef Citations:
4
Total Statistics:

Full-Text HTML Views: 6205
Abstract HTML Views: 1909
PDF Downloads: 947
ePub Downloads: 712
Total Views/Downloads: 9773
Unique Statistics:

Full-Text HTML Views: 2975
Abstract HTML Views: 1071
PDF Downloads: 681
ePub Downloads: 477
Total Views/Downloads: 5204



Creative Commons License
© Chen and Zhang; Licensee Bentham Open

open-access license: This is an open access article licensed under the terms of the Creative Commons Attribution-Non-Commercial 4.0 International Public License (CC BY-NC 4.0) (https://creativecommons.org/licenses/by-nc/4.0/legalcode), which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.

* Address correspondence to this author at the Department of Hydraulic Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou, Xuelin Road 583#, Hangzhou, 310018, P.R. China; Tel/Fax: +0086-15968874901; E-mail: xiaoyue.z@hotmail.com


Abstract

The seepage control system of a high Concrete Face Rock-Fill Dam (CFRD) may have anti-seepage deficiencies during both construction and operation. In order to solve these, the three-dimensional Finite Element Method (FEM) model was built based on dam body filling, anti-seepage system, defect location and bedrock distribution. The seepage field simulation and computation were carried out using an improved node virtual flux method and the zero-thickness crack model theory. The water head distribution, seepage lines and dam leakage field were obtained by simulation under different conditions, and the seepage characteristics during construction and operation were analyzed systematically. Taking a high CFRD as an example, the results showed that during the flood-control construction period, the incomplete nature of the dam face slab can lead to seepage damage near the second seepage control line. Moreover, during operation period; the seepage control system was still effective when the dam face slab was incomplete.

Keywords: Crack model, High CFRD, Leakage, Node virtual flux method, Seepage control, Seepage lines, Water surface slope.