The Open Construction & Building Technology Journal

ISSN: 1874-8368 ― Volume 13, 2019

Effect of Mix Proportions on Rheological and Hardened Properties of Composite Cement Pastes

The Open Construction and Building Technology Journal , 2008, 2: 15-23

Mohammed Sonebi, Denis McKendry

School of Planning, Architecture and Civil Engineering, Queen’s University Belfast, Belfast, Northern Ireland, UK.

Electronic publication date 4/3/2008
[DOI: 10.2174/1874836800802010015]

CrossRef Citations:

Article Metrics:

Geographical View
Total Statistics:

Abstract HTML Views: 584
PDF Downloads: 260
Total Views/Downloads: 894

Unique Statistics:

Abstract HTML Views: 425
PDF Downloads: 158
Total Views/Downloads: 631


There is an increasing need to identify the effect of mix composition on the rheological properties of composite cement pastes using simple tests to determine the fluidity, the cohesion and other mechanical properties of grouting applications such as compressive strength. This paper reviews statistical models developed using a fractional factorial design which was carried out to model the influence of key parameters on properties affecting the performance of composite cement paste. Such responses of fluidity included mini-slump, flow time using Marsh cone and cohesion measured by Lombardi plate meter and unit weight, and compressive strength at 3 d, 7 d and 28 d. The models are valid for mixes with 0.35 to 0.42 water-to-binder ratio (W/B), 10% to 40% of pulverised fuel ash (PFA) as replacement of cement by mass, 0.02 to 0.06% of viscosity enhancer admixture (VEA), by mass of binder, and 0.3 to 1.2% of superplasticizer (SP), by mass of binder. The derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of composite cement paste are presented. Such parameters can be useful to reduce the test protocol needed for proportioning of composite cement paste. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods which are highlighted. The multi parametric optimization is used in order to establish isoresponses for a desirability function of cement composite paste. Results indicate that the replacement of cement by PFA is compromising the early compressive strength and up 26%, the desirability function decreased.

Download PDF


"We greatly appreciate the efficient, professional and rapid processing of our paper by your team. The editors are so kind and professional to send us the reviewers' feedback in time. Those comments were all valuable and very helpful for us in revising and improving our paper."

Hailong Zhao
School of Civil Engineering,
Tianjin University, Tianjin,

Browse Contents

Webmaster Contact:
Copyright © 2019 Bentham Open